- 632
- 5 402 862
Randy Richard In The Shop
United States
Приєднався 18 сер 2012
I enjoy showing shop projects involving; Machining, Woodworking, Welding, Metalworking. I am a retired Marine Engineer with 30 years of seagoing experience. I am also a Airframe and Powerplant FAA Certified Mechanic and Private Pilot. I also enjoy Fly Tying and Flyfishing. I will be posting How To, DIY and Educational videos in all of these area's. Please visit my shop and Subscribe.
Hardinge DSM 59 Turret Lathe For Sale
This is my Hardinge DSM 59 Turret Lathe. It is for sale.
Hardinge DSM 59 - Turret Lathe
Center-Drive Preloaded Ball Bearing Headstock.
Ball Bearing Lever Collet Closer.
Hardened & Ground Steel Dovetail Bed Ways.
Double Tool Cross Slide & 6 tool Turret
Collets 1” to 1/32” by 64ths. & Hex collets See list of missing collets.
Self-Draining Oil Pan & Coolant System
Welded Steel Pedestal with Knee Space.
Swing Over Bed: 9″
Spindle Capacity (round collets): 1-1/16″
Spindle Capacity (hex collets): 7/8″
Spindle Capacity (square collets): 3/4″
Spindle Capacity (step chucks): 1″ to 6″
Spindle Capacity (jaw chucks): 5″
Spindle: Type: Type 21 Collet Nose: 2-3/16″ - 10 TPI
Speeds (10): 450 to 4,000 RPM
Bed: Width: 3-3/8″ Length: 31
Motor: 1.0 Horsepower
Electrical: 230 Volt, Three Phase, 60 Hz
Overall Dimensions: 69″ x 30″ x 50″ tall
Lathe Item #: 13964
Pickup at Mariposa, Ca. My Shop. Loading assist with fork lift.
Randy Richard
Cell: 209-604-3035 Email: RRINTHESHOP@GMAIL.COM
Asking: $4000.00 OBO
Missing Collets Type 21: 61/64”, 29/32”, 55/64”, 53/64”, 47/64”, 45/64”, 37/64”, 35/64”, 33/64”, 31/64”, 15/32”, 11/32”
Included Hex Collets: 1/2”, 7/16”, 3/8”, 5/16”,1/4”, 3/16"
Pick up at my shop, Mariposa, CA, USA.
EMail for questions. rrintheshop@gmail.com
Join this channel to get access to perks:
ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin
Support the channel:
🎯Subscribe: ua-cam.com/users/Catfish6945
🎯Instagram: rrintheshop
🎯Knocker info: Email To: Video Link: ua-cam.com/video/2XPITEPSALY/v-deo.html
RRINTHESHOP@GMAIL.COM
Hardinge DSM 59 - Turret Lathe
Center-Drive Preloaded Ball Bearing Headstock.
Ball Bearing Lever Collet Closer.
Hardened & Ground Steel Dovetail Bed Ways.
Double Tool Cross Slide & 6 tool Turret
Collets 1” to 1/32” by 64ths. & Hex collets See list of missing collets.
Self-Draining Oil Pan & Coolant System
Welded Steel Pedestal with Knee Space.
Swing Over Bed: 9″
Spindle Capacity (round collets): 1-1/16″
Spindle Capacity (hex collets): 7/8″
Spindle Capacity (square collets): 3/4″
Spindle Capacity (step chucks): 1″ to 6″
Spindle Capacity (jaw chucks): 5″
Spindle: Type: Type 21 Collet Nose: 2-3/16″ - 10 TPI
Speeds (10): 450 to 4,000 RPM
Bed: Width: 3-3/8″ Length: 31
Motor: 1.0 Horsepower
Electrical: 230 Volt, Three Phase, 60 Hz
Overall Dimensions: 69″ x 30″ x 50″ tall
Lathe Item #: 13964
Pickup at Mariposa, Ca. My Shop. Loading assist with fork lift.
Randy Richard
Cell: 209-604-3035 Email: RRINTHESHOP@GMAIL.COM
Asking: $4000.00 OBO
Missing Collets Type 21: 61/64”, 29/32”, 55/64”, 53/64”, 47/64”, 45/64”, 37/64”, 35/64”, 33/64”, 31/64”, 15/32”, 11/32”
Included Hex Collets: 1/2”, 7/16”, 3/8”, 5/16”,1/4”, 3/16"
Pick up at my shop, Mariposa, CA, USA.
EMail for questions. rrintheshop@gmail.com
Join this channel to get access to perks:
ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin
Support the channel:
🎯Subscribe: ua-cam.com/users/Catfish6945
🎯Instagram: rrintheshop
🎯Knocker info: Email To: Video Link: ua-cam.com/video/2XPITEPSALY/v-deo.html
RRINTHESHOP@GMAIL.COM
Переглядів: 2 031
Відео
BestArc Welder Review Mig145
Переглядів 76014 днів тому
I open the box, review and test the BestArc Mig 145 welder. Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin Some of following are Associate links. As an Amazon Associate I earn from qualifying purchases. Welder Link: amzn.to/3x1oUsG Support the channel: 🎯Subscribe: ua-cam.com/users/Catfish6945 🎯Instagram: rrintheshop 🎯Knocker info: Em...
How to Make Small Wheel Attachment for a 2x72 Belt Grinder
Переглядів 2,6 тис.2 місяці тому
Full Build for a Small Wheel Attachment for your Belt Grinder. Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin Drawings are available if you Join the membership. Support the channel: 🎯Subscribe: ua-cam.com/users/Catfish6945 🎯Instagram: rrintheshop 🎯Knocker info: Email To: Video Link: ua-cam.com/video/2XPITEPSALY/v-deo.html RRINTHESHOP...
Hydraulic Cylinder Stop | Grapple | Attachment
Переглядів 3,4 тис.2 місяці тому
Making a Hydraulic Cylinder Stop. This is for a Bobcat fitted with a Grapple. this will stop the grapple for hitting the Hydraulic couplers when the grapple is open fully and rolled back fully. Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin Support the channel: 🎯Subscribe: ua-cam.com/users/Catfish6945 🎯Instagram: rrintheshop 🎯Knocker...
Heat Treat Quench Tank
Переглядів 8873 місяці тому
Making a heat treatment quench tank. I use this during blacksmithing. Join the channel Membership to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin Support the channel: 🎯Subscribe: ua-cam.com/users/Catfish6945 🎯Instagram: rrintheshop 🎯Knocker info: Email To: Video Link: ua-cam.com/video/2XPITEPSALY/v-deo.html RRINTHESHOP@GMAIL.COM
Make a Giant Bench Block / Anvil for Your Workshop
Переглядів 9 тис.3 місяці тому
Making a Giant DIY Bench Block or Bench Anvil. Great for Leatherwork, Knife Making, Gunsmithing, Silversmithing. I make it from AR 400 - 500 Steel an old Heavy Equipment Scraper Cutting Edge. Lots of machining in this video. Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin Drawings are available if you Join the membership. 🎯Subs...
Forge Upgrade 2 Burners or 4 Burners
Переглядів 1,5 тис.4 місяці тому
Forge Upgrade 2 Burners or 4 Burners making it a selectable feature. Using a 3 way valve and a check valve, manifold isolation. This is a very nice forge, fuel efficient and quiet. I am not affiliated with NC tool. NC Tool: Forges www.nctoolco.com/shop/forging/gas-forges/c/9 Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin 🎯Subs...
Sharpening Jig for 2 x 72 Belt Grinder | Knives
Переглядів 1,8 тис.4 місяці тому
Sharpening Jig for 2 x 72 Belt Grinder | Knives. This jig will fit most all 2 x 72 Belt Grinders, just adjust the arm for your grinder. Check out my knife carbide filing guide. Knife Filing Guide: ua-cam.com/video/Fgy3HLyjBQc/v-deo.html Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin Drawings are available if you Join the membe...
File Guide for Knife Making | Carbide File Guide | For Knife Makers
Переглядів 3,4 тис.4 місяці тому
I designed and build a DIY Carbide File Guide. Used in Knife Making. Filing Guide , Grinding Guide Check out the bevel angle and sharpening jig for your belt grinder. Sharpening Jig : ua-cam.com/video/GPPmgdwG0N8/v-deo.html Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin Drawings are available if you Join the membership. 🎯Subsc...
2 x 72 Belt Grinder Mounting a Large Contact Wheel
Переглядів 1,9 тис.5 місяців тому
2 x 72 Belt Grinder Contact Wheel, I build a new tool arm and install a 10" OD Contact wheel. You need one of these. Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin 🎯Subscribe: ua-cam.com/users/Catfish6945 🎯Instagram: rrintheshop 🎯Knocker info: Email To: Video Link: ua-cam.com/video/2XPITEPSALY/v-deo.html RRINTHE...
The Most Awesome Blacksmithing Anvil Stand
Переглядів 1,8 тис.5 місяців тому
How to make an Awesome Blacksmithing Anvil Stand, Start to Finish. Black Oak Log into a beautiful stand. Mobile Anvil Stand, wheels and Handle. Complete DIY Anvil Stand. This is what happens when a machinist makes and Anvil Stand. Anvil is a Peter Wright, 162 Lbs, 1-2-23, Made in England around 1864. Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH...
My EDC Love it
Переглядів 9495 місяців тому
My EDC knife. Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin 🎯Subscribe: ua-cam.com/users/Catfish6945 🎯Instagram: rrintheshop 🎯Knocker info: Email To: Video Link: ua-cam.com/video/2XPITEPSALY/v-deo.html RRINTHESHOP@GMAIL.COM
My 2023 Projects year end Review Did you see them all?
Переглядів 1,5 тис.5 місяців тому
My 2023 year in review. Many projects and a long hard winter. Survived and gotterdone. Support the channel: 🎯Join this channel to get access to perks: ua-cam.com/channels/meR2apcSAeH21q-xcNwdfw.htmljoin 🎯Subscribe: ua-cam.com/users/Catfish6945 🎯Instagram: rrintheshop 🎯Knocker info: Email To: Video Link: ua-cam.com/video/2XPITEPSALY/v-deo.html RRINTHESHOP@GMAIL.COM
Knives for Christmas? / Shop Update
Переглядів 1,7 тис.6 місяців тому
Knives for Christmas? / Shop Update
Teslong TD450S Articulating Borescope These are awesome
Переглядів 2,2 тис.6 місяців тому
Teslong TD450S Articulating Borescope These are awesome
Mounting Vises / Simple Metal Workbench / Welding Table P2
Переглядів 1,7 тис.6 місяців тому
Mounting Vises / Simple Metal Workbench / Welding Table P2
Simple Metal Workbench / Welding Table P1
Переглядів 1,7 тис.6 місяців тому
Simple Metal Workbench / Welding Table P1
Yardmax 35 Ton Log Splitter Assembly / Review / Test
Переглядів 4 тис.7 місяців тому
Yardmax 35 Ton Log Splitter Assembly / Review / Test
Razzor Busted A Nut / Hydraulic Cylinder Repair
Переглядів 3,7 тис.8 місяців тому
Razzor Busted A Nut / Hydraulic Cylinder Repair
Shop Update - Shout Outs for some great channels
Переглядів 1,7 тис.10 місяців тому
Shop Update - Shout Outs for some great channels
Old Vise Repair & Restoration / Unlocking the Secrets
Переглядів 7 тис.11 місяців тому
Old Vise Repair & Restoration / Unlocking the Secrets
New Evolution Tool for the Shop - Evomag42 Mag Drill
Переглядів 6 тис.11 місяців тому
New Evolution Tool for the Shop - Evomag42 Mag Drill
Build the Ultimate Blacksmith Leg Vise & Stand Striking Anvil
Переглядів 3,6 тис.Рік тому
Build the Ultimate Blacksmith Leg Vise & Stand Striking Anvil
Build a Suffolk Door Latch DIY Build a Greenhouse
Переглядів 1,4 тис.Рік тому
Build a Suffolk Door Latch DIY Build a Greenhouse
I like the design of these clamps 👍 But I can't find the plans on UA-cam machinists group on facebook 😔. Where can I find the drawings for them ?..
Only from me. If your a member.
The new tool must be a CNC lathe. I have an HLVH, DSM-79, and a Haas TL-1. The HLVH-H gets used often and the DSM still gets used occasionally. I probably use both because I rebuilt both including bed regrinds. I get it Randy, if you don’t have the room, something’s gotta go. Good luck with the sale. Someone will be getting a very nice machine.
as soon as it goes out the door, you're gonna need it...lol.. that's usually the way these things go
Randy I make my table fence I can similar you look beautiful the wood do the different my I use aluminium ah you have good tools there in you shop the rods come very nice and clean who designed that table saw many years ago have vision from that to the future if look the new ones is all copy of the old ones and the money they ask look similar designs today more sofisticado but nothing to be impressed cups you can make them easy I like bicycle ends cups for handle bars well front that you make really nice big table randy tell about the motor back in Colombia I make my own table whit 5 hp motor because the wood in Colombia is very hard still 10 inches is to small my is from 12 inches thanks randy I’m part of channel now thanks again
Very nice lathe. Hope you sell it soon.
Why is expensive the motor sorry no body help this no good I’m to far in London I like to help you honestly you probably my age I’m pensioner from English government because you became pensioners in Colombia you go to be dead first here in England when you work the government look after you pension properly anyway I keep watching you I see you today for first time you my inspiration to be working no matter what age in London old people when retired they don’t do anything to keep healthy in Colombia we do like you active every day in country side I really admire you my friend hopefully god help out to open my shop in Colombia to keep a life and active everyday thanks my friend I’m from cali Colombia where about you in America I like to visit America one day 😂🙏🙏
Beautiful machine. Not in my cards at the moment, but I sure wish it was. I have a turret for my SB 10L and a cross slide, but no cutoff. Woe is me...🤣
Randy they still make this machine o finish this is quality for generationtions to come😅
Ah I say hello from London when you finish send to Colombia that is really good table saw ah you fixed is good because that iron is easy to break very good job honestly I wish to have that in my work shop congratulations you deserve gold medal my friend 😅
Yes is nice colour come out nice well we see top is very nice proper made I all ways American machine specially for wood work in my country maybe when I go back I going to see if I find any of this delta table saw maybe somewhere at the moment new ones are very expensive don’t put any broken have to be some one to fix cust iron o aluminium in Colombia there people for that here in England as well paint stripper take longer but works any way it looks promising we see😢🎉
Well that’s proper American table saw not anymore and definitely ball bearing have to change I don’t to say but every thing have to be clean for the age is in good condition don’t loose anything well take to some one whit this special machine to take paint off good luck
You need a bigger workshop then you could keep it.
Hardinge are the Cadillac of lathes, they're manufactured only about an hour from where I live in NY. If I had the money and wasn't on the east coast I'd love to have a little Hardinge.
Beautiful machine, Randy. I sold my Hardinge last year Great explanation of the collets. exactly how it was explained to me in 1966 at Osborne engineering.
Wish we had the room for that piece, great presentation.
Good Afternoon Randy 😊 You know, in about a month, you're going to wish you kept it. It's always the case.
Free delivery to southwest Michigan, including right? Just kidding. Looking forward to seeing what replaces this. Have a Jesus filled day everyone Greg in Michigan
You bible bangers are something. Ever have an atheist always telling people there are no gods? Ever hear a buddhist telling you to think about buhdah in the middle of an unrelated conversation?
That was actually a two owner machine. It was purchased new by Techtronics in Portland, Ore. and then to you. Obviously was taken care of by you and Techtronics over the years. I actually never used the machine. It traveled from Portland to The Dalles Iron Works in The Dalles Oregon and sold to me. It was never used at The Dalles. It passed then to you. So actually only two owner operators in its lifetime.
Glad to see you out still getting it done Don. 🙂
I see this announcement as “I’m done making scribes.” 😂 Gonna be a nice machine for someone.
This is a neat channel because you know he is working on a thousand different projects all day long and decides what he wants to film. I bet his neighbors keep him busy. Just sayin. Randy here's to yah and your neighbors that hang out in your shop and watch you do stuff are lucky. This guy can fix any known mechanical problem known to man!
Thank you for the great comment. Can't fix everything but I try.
It looks nice. You might be sad to see it go. Must be something very cool coming.
I have full turret ability for my Logan Lathe. Even though the Hardinge is a sweet machine.
Thanks for the video keep on keeping on.
Thanks, will do!
About to drop some coin on the 9500tfc, been kicking tire for 8 hours straight reading and watching reviews and to add natural gas to any its 300$ for kit&hose and once I account for the watt drop for natural I have 1000$ into it and can’t power all of condo, so for 1150$ i get 9500/7500 watts power everything at 50-70% load and don’t have to stock pile fuel, just have few tanks 30gal. Lp if natural gets disrupted, gas if that fails. Gas should be less than 50% load, now i added the start up watts for big items 2ton ac, fridge, freezer, pc 3 monitors, two 75” tv, microwave, stove, etc 4500 now will turn on ac when stove or microwave is used of course but does that sound right to you? Am I calculating it correctly? Great video and thanks for your time. Be safe & from Florida, don
Yep sounds good. Remember this is an emergency generator. Use for essential items. Fridge, freezer, stove/microwave, AC if you really need it. Thanks for stopping in.
Nice welder Randy👍 Hope to see you in a couple weeks
I hope so too!
Good review Randy
Thank you Chuck. Take care.
Hello Randy! They couldn’t have picked a better person to review their product. A great little unit and you did some awesome welds with it especially with no gas! Great stuff!!! 😃👍
Thank you John, actually works quite well.
Great review video Randy. Thank you. Nice little machine.
Thank you Phil. Works good for a quick repair unit.
Gooooooood morning Randy 😂 Thanks for sharing 👍
Good morning! Craig. Thanks.
0.040 wire in a 110V machine? Well count me ready to watch the rest of the video!
Thanks, worked great, I was quite surprised.
Is that the AL - 510S?
The z-axis is AL-510S Y-axis is AL-310S Thanks.
Its a little one isnt it .But obviously you welled it. Thanks for the video keep on keeping on.
Thanks for watching! Harold. Take care.
I have been looking at these. Good to see a video out 👍
Thanks Randy, very busy and a long time family friend past away and helping the family. Not a bad unit.
Nice works
Thank you! Cheers!
are you setting up inside or outdoors. Outdoors will give you nothing but trouble with moisture in the air. Inside will give less trouble. And don't forget the autodrain to remove condensation. (heck I would put 2 in just in case one fails)
Outside, it is very dry here, drains installed. Thanks
@@RRINTHESHOP Didn't realize that Randy. Great project.
Wow!!! I didn't even know that Harbor Freight had an industrial model. That thing is big and looks like it already has a few upgrades that are very needed anyway. Super cool video my friend.
Great cabinet.
How much does it cost to get this done ?😊
I heard from a generator mechanic to only use conventional oil for the first 100 hours to break it in then anything else works
Actually non-detergent oil is the best for breaking in an engine. With this generator I was just following there instructions. Thanks for the comment.
@@RRINTHESHOP so I’m like you I used synthetic oil for first 25hrs now conventional for the next 25 if I’m thinking of switching back to synthetic oil after this 25hrs I’m using toro 10w30 extreme heat and cold blend it’s blue turns black when ready to change if sooner or later then 25 hrs of run time just cause I’m in Texas and we have some Smokey heat here now
I know that you can't physically show. every aspect of the restoration process, but when you clean bearings or remove the grease, if you could give us just a brief rundown of what you do, I kind of want to understand the whole process. and even the simple things for us. Newbies makes a difference. Paint prep painting the whole works.
Thank you.
Cool Better than a brought one
Way better. Thanks.
Got the same one recently paid 14 bucks for it. Just missing the spindle nut. Is in great shape! The vid really helped me to know how it works and the dissambley its basically the assembley reversed! Saying hi from Costa Rica! Thx
Thank you, Good deal, very useful tool.
Hi buddy,great video. I've bought one of these today, I'm planning on using it for basic carpentry,skirting boards etc..Will this do the job?
Thank you, Shod work great. I still use mine all the time.
Thanks for the video. May I ask how you wired up the three prong cord in place of the original 2 prong? I'm restoring an old Craftsman motor and I'd like to add a ground wire if possible. Thanks!
Thank you. Connect the ground lead to the frame of the motor in the connection box and the other end to the ground terminal in your plug.
I truly enjoy the warmth and tenderness of how gentle. Machinist can be with a machine
Thank you.
where did you order the dust colector. I found nothing on HF website.
You usually have to call a store direct to see if they have one. Thanks.
Here are a couple of links. www.harborfreight.com/blast-cabinet-reclaimer-dust-collector-kit-59342.html amzn.to/3Ukgswd
Used to work with various dieheads many years ago, Coventry, Landmatic, Namco, Wagner. The best were the Namco which had round chasers. Each type had it's own fixture for regrinding and as you say angles were different for each material.
Thank you Andy. Using a die is great when making a bunch of parts.
Finally, someone makes a crossfeed nut out of actual bearing bronze and not brass! Too many YT machinist channels use brass for this application, which is just wrong. Thank you Randy!
Thank you , I always use 932 bronze.
So you have to have the gen on and ready if there should be power outage. Does this drain the gens battery? In the on/ready position how long can it stay ready before battery discharges? Finally, is the battery charger that comes with the unit a fast charge or trickle charger.
I am unable to answer your questions. I no longer have this generator, I gave it to a family in need. Thank you.
Question about the dial indicator, how do you know it's not just picking up/showing surface irregularities instead?
I always go on a smooth surface. Thanks.
@@RRINTHESHOP I'm just learning machining, I mean when you try this for the first time, how do you know whether it's the surface or the angle that's reading on the indicator?
Place the indicator on the tools side surface at one end of the tool, set the indicator dial to zero. Then turn the cross feed so the indicator is at the other end. Do not worry about the reading in between. Then turn the tool post so the reading is 1/2 of the of the difference of the tow readings. Then travel back to the starting end and to this process until both readings are zero and no adjustment is necessary.
@@RRINTHESHOP Ahh okay, so by doing that you eliminate any chance of surface irregularity showing up as you're cross sliding back and forth?
I have always wondered if a capacitor creates an off (main ) phase wave to act more like dc current or 3 phase. Obviously it adds a boost but it would have to precede the main phase. Comments?